Wall bed support

How can we help you today?

Watch our assembly assistance capsules
Download the assembly guide
Order broken or missing piece
Learn more about our warranty
Write us

Speak with customer support

Support hours *

Monday 8h00 - 17h00
Tuesday 8h00 - 17h00
Wednesday 8h00 - 17h00
Thursday 8h00 - 17h00
Friday 8h00 - 16h00
Saturday Closed
Sunday Closed

* Eastern Standard Time in North America (UTC-5)

Toll free number

1 888 823-7827

Frequently asked questions

What is covered by the warranty?

Catégorie: Warranty

The Bestar warranty covers for ten years against any defects due to faulty material or workmanship, and preventing the intended use of the product.

This warranty is limited to the repair or replacement of defective parts free of charge, depending on availability. Any labor incurred and paid by the client is not covered by this warranty.

This warranty applies under conditions of normal use. It is not valid in the event of defects caused by the buyer due to negligence, misuse, improper exposure, excessive use or changes made to the furniture item.

Bestar reserves the right to require proof of purchase or other receipts for the purposes of this warranty.

The warranty is not transferable and applies only in Canada and the United States, excluding Alaska, Hawaii and Puerto Rico.

For more information, please contact our customer service:

1 888 8BESTAR        Contact us

Can you help me adjust my drawers?  

Catégorie: Assembly

Yes, here are the four steps to follow:

1)    Make sure to use the correct screws for the metal slides;

2)    Make sure the screws are set very straight;

3)    Make sure to mount the drawer front in its proper position;

4)    Adjust the drawer fronts as shown in the illustration below.

quest5d1
Here is a video showing how to adjust the front

How are the components held together?

Catégorie: Assembly

The main assembly device consists of a washer and rod that hold the pieces of wood together, as shown in the illustration below. It is very important to follow the washer assembly instructions carefully.

1)Use a flat screwdriver to turn the washer.

quest4a1

2) Turn the washer to 2 o’clock. However, to ensure the washer is tight, finish by applying a little pressure.

 

quest4b1

What if I have assembly problems or missing or damaged parts?

Catégorie: Assembly

Do not bring back your furniture to the retailer, we can assist you directly.

You can look for online help on our online support page or contact our customer service at 1-888-8BESTAR. We will answer all your questions and quickly ship what you need to complete the assembly.

Our opening hours are:

Monday to Thursday, from 8:00 AM to 12:00 (noon) and from 1:00 PM to 5:00 PM (EST);

Friday, from 8:00 AM to 1:00 PM.

Thank you for keeping the assembly instructions on hand when calling.

Do you have any assembly tips?  

Catégorie: Assembly

Here are four steps to facilitate the assembly of your Bestar furniture:

  • Before starting, read the assembly instructions carefully and be willing to follow each step.
  • Layout all the parts on the floor, including the hardware, and count them to make sure nothing is missing.
  • When the instructions recommend doing so, enlist the help of another person to avoid injuring yourself or damaging the furniture.
  • To avoid loosening the assembled components or damaging the wood, do not push, pull or drag the furniture over the floor or carpet. We recommend assembling the furniture as close as possible to its resting place. If you must move it, enlist the help of another person, lift it completely, and transport it slowly.

For additional help during assembly, you can also check our online support page.

Where can I buy Bestar products?  

Catégorie: Furniture

Our furniture is sold by many retailers. However, the Bestar product selection may vary from one retailer to another. Click here to find the retailer located near you, or contact our customer service:

1 888 8BESTAR             contact us

How do I clean my new Bestar Furniture?

Catégorie: Furniture

To dust, we recommend using a soft, dry cloth. To remove stains, use a cloth soaked in a water and mild detergent mixture. To clean your furniture, avoid placing any wet objects directly on the furniture or using commercial cleaning products.

What materials are used to make your furniture?  

Catégorie: Furniture

We use high-quality laminated particle boards, coated with a paper finish to give it its wood color and texture. The majority of our collections combine the properties of commercial melamine and papers that are highly resistant to scratches, stains and wear.

Did you know that Bestar was the first North American manufacturer of ready-to-assemble furniture to use a melamine finish? In fact, the majority of our products are covered with this material, which is recognized by the industry for its durability and resistance to scratches, stains and burns.

How to install the new improved already extended pistons?

Catégorie: Assembly

Here is a manual showing how to install the new improved already extended pistons.
Click here to download

Read more questions